0ebe73e1

WMicrotracker SMART x8 HD 多模式小型生物運動追蹤分析系統

Wed, 22 Jul 2026 03:42:06 GMT

貨號

714001

Edge, 6 Wells, Clear, Flat Bottom, Non-TC, Sterile

Edge 6孔未TC 泡殼裝

產品訊息

WMicrotracker SMART x8 HD 是 Phylumtech 所開發的新一代智慧型生物運動分析平台，可針對 C. elegans、線蟲、果蠅幼蟲、斑馬魚幼體、小型昆蟲及其他微小生物進行非侵入式行為分析。

系統整合：

高解析度紅外線影像、AI / Machine Learning 生物辨識演算法

自動軌跡追蹤、八盤式自動輪盤(Carousel)、全自動長時間連續量測

研究人員可即時獲得：

運動速度、移動距離、活動能力(Motility)、運動軌跡、Rotation Index

Population Analysis

適用於各種生命科學研究及藥物篩選。

描述

產品特色

AI智慧追蹤分析

採用 Machine Learning 演算法，自動辨識每一隻生物個體。

可即時分析：

✓ Individual Tracking

✓ Population Analysis

✓ Trajectory Mapping

✓ Speed Calculation

✓ Distance Calculation

✓ Motility Score

雙模式偵測技術（Dual Mode）

① Tracking Mode（軌跡追蹤模式）

適合：C. elegans、NGM培養、線蟲、小型幼蟲，利用紅外線折射影像技術取得每隻生物完整移動路徑。

可得到：

每隻生物速度(mm/s)、每隻移動距離(mm)、軌跡圖、Rotation Index、Motility Score

② Microbeam Mode（紅外線微光束模式）

適合：液體培養、固體培養、空氣培養、大於0.1 mm生物，利用超過 2,000 個紅外線微光束偵測生物活動。

適合：Chemotaxis、Activity Screening、Drug Screening、Population Activity

8盤自動輪盤

SMART x8 HD 配備八盤式自動輪盤(Carousel)

可一次放置：

8 個 35 mm Petri Dish

系統可依照設定：

✓ 自動切換樣品

✓ 定時量測

✓ 長時間監測

✓ 完整自動化

大幅降低人工操作時間，提高重複性。

可量測參數

WMicrotracker SMART x8 HD 可自動輸出：

Particle Number、Average Speed、Travel Distance、Motility Score、Rotation Index、Speed Histogram、Individual Track、

Population Report

所有資料可直接輸出 CSV 供 Excel、GraphPad Prism、R 或 Python 分析。

軟體功能

軟體提供完整分析流程：

✔ 即時影像

✔ AI辨識

✔ 軌跡繪製

✔ 自動統計

✔ Histogram

✔ Report

✔ 離線分析

✔ Reprocess

✔ Joint Report

✔ Batch Analysis

研究完成後可重新分析資料，不必重新做實驗。

WMicrotracker SMART x8 HD 已廣泛應用於：

神經退化疾病 (Alzheimer's Disease, Parkinson's Disease, ALS)

老化研究 (Lifespan, Healthspan, Aging)

毒理學 (Drug Toxicity, Environmental Toxicology, Heavy Metal)

藥物篩選 (Small Molecule, RNAi Screening, Compound Screening)

腸道菌研究 (Microbiome, Host Interaction)

趨化性分析 (Chemotaxis)

缺氧研究 (Hypoxia)

遺傳學 (Gene Mutation, RNAi)。

上述皆為原廠提供或示範之主要應用方向。

適用生物可分析：

✓ C. elegans

✓ Nematodes

✓ Zebrafish larvae

✓ Drosophila larvae

✓ Small insects

✓ 其他 >0.1 mm 小型生物

技術規格

相機 5 MP Infrared Camera

樣品 35 mm Petri Dish

容量 8 Plates

分析模式 Tracking / Microbeam

量測時間 1–5 min (可自訂)

影像更新 1 frame/sec

輸出 CSV

作業系統 Windows 10 / 11

CPU Intel Core i7以上建議

介面 USB

為什麼選擇 WMicrotracker SMART x8 HD？

✅ 非侵入式紅外線量測

✅ AI 自動辨識

✅ 即時追蹤

✅ 八盤自動輪盤

✅ 全自動長時間量測

✅ 操作簡單

✅ 適合藥物篩選

✅ 支援高通量研究

714001 Edge Cell Culture Plate Edge細胞培養板 Edge, 6 Wells, Clear, Flat Bottom, Non-TC, Sterile NEST biotechnology

Mon, 25 May 2026 03:38:03 GMT

貨號

714001

Edge, 6 Wells, Clear, Flat Bottom, Non-TC, Sterile

Edge 6孔未TC 泡殼裝

產品訊息

•護城河板周圍具有溝槽設計，透過改變原有96孔板的結構，在最外側孔的外側設計了不同寬度及厚度的槽形結構，因此達到最大程度消除邊緣效應的目的，同時又保證了細胞培養的最佳狀態。提高了培養板的溫度穩定性和平衡的濕度環境，從而減少或消除了邊緣效應，確保了細胞生長的均勻性。

•培養板蓋具有獨特的冷凝環設計，減少了溶液的蒸發與冷凝。

Grooves are designed at the edge of the culture plate to help cells maintain their optimal state during cell culture. They provide a stable temperature and balanced humidity environment for the plate, which reduces or eliminates edge effects and ensures uniformity in cell growth.

描述

產品詳情 Introduction

· 高透明度，聚苯乙烯

· 設計尺寸符合ANSI-SBS格式

· 板蓋切角設計並附有冷凝環，減少污染機會

· 底部平整清晰，每孔均編碼標識，易於區分觀察

· 板側齒狀設計，方便拿取；底沿凸點移動，防噪音

· 無熱原，無內毒素，無DNase/RNase

· 電子束滅菌，SAL=10^-6

Introduction

1. Liquid filled channels surround wells to eliminate edge effect

2. TC treated - plasma etched for adherent cells

3. Flat bottom wells

4. Optically clear USP grade VI virgin polystyrene - ideal for microscopy

5. Alphanumeric markings for easy sample ID

6. SBS/ANSI Footprint, suitable for automation

7. Raised well edges to slow evaporation

8. Small feet on the bottom of the plate to prevent scratching microscope objectives

9. Clear lot number printed on each dish for traceability

10. Notched bottoms with raised edges for stable stacking

Quality you can rely on:

1. cGMP Compliant (21 CFR part 820)

2. Produced in ISO 13485:2016 and ISO 9001 facility

3. Molded and packed in ISO 7 cleanroom

4. E-beam sterilized and lot tested to SAL 10^-6

5. Lot tested free of pyrogens USP 85

6. Lot tested free of cytotoxins/pyrogens In Vivo USP 88 and In Vitro USP 87

7. Lot tested free DNase/RNase and DNA

8. Lot tested free BSE/TSE

9. Certified free of animal products

714011 Edge Cell Culture Plate Edge細胞培養板 Edge, 6 Wells, Clear, Flat Bottom, TC, Sterile

Mon, 25 May 2026 03:19:22 GMT

貨號

714011

Edge, 6 Wells, Clear, Flat Bottom, TC, Sterile

Edge 6孔 TC 泡殼裝

產品訊息

•培養板蓋具有獨特的冷凝環設計，減少了溶液的蒸發與冷凝。

描述

產品詳情 Introduction

· 高透明度，聚苯乙烯

· 設計尺寸符合ANSI-SBS格式

· 板蓋切角設計並附有冷凝環，減少污染機會

· 底部平整清晰，每孔均編碼標識，易於區分觀察

· 板側齒狀設計，方便拿取；底沿凸點移動，防噪音

· 無熱原，無內毒素，無DNase/RNase

· 電子束滅菌，SAL=10^-6

Introduction

1. Liquid filled channels surround wells to eliminate edge effect

2. TC treated - plasma etched for adherent cells

3. Flat bottom wells

4. Optically clear USP grade VI virgin polystyrene - ideal for microscopy

5. Alphanumeric markings for easy sample ID

6. SBS/ANSI Footprint, suitable for automation

7. Raised well edges to slow evaporation

8. Small feet on the bottom of the plate to prevent scratching microscope objectives

9. Clear lot number printed on each dish for traceability

10. Notched bottoms with raised edges for stable stacking

Quality you can rely on:

1. cGMP Compliant (21 CFR part 820)

2. Produced in ISO 13485:2016 and ISO 9001 facility

3. Molded and packed in ISO 7 cleanroom

4. E-beam sterilized and lot tested to SAL 10^-6

5. Lot tested free of pyrogens USP 85

6. Lot tested free of cytotoxins/pyrogens In Vivo USP 88 and In Vitro USP 87

7. Lot tested free DNase/RNase and DNA

8. Lot tested free BSE/TSE

9. Certified free of animal products

703012 Cell Culture Plate 細胞培養板 6 Wells, Clear, Flat Bottom, Non-TC, Sterile

Mon, 25 May 2026 02:23:38 GMT

貨號

703012

6 Wells, Clear, Flat Bottom, Non-TC, Sterile

6孔未TC

產品訊息

細胞培養板作為培養細胞的常用且重要的工具，形狀、規格、用途多樣。細胞培養板是由高品質聚苯乙烯材料，以超精密模具及全自動化生產製程生產,產品應用於實驗室細胞培養，優異的光學性質便於顯微觀察，表面經過TC處理，胞貼壁效果較佳。

Tissue culture plates are ideal when you need to grow multiple cell cultures at once. Nest culture plates are available with 6,12,24,48,96 or 384 wells. They also come tissue culture treated for adherent cell lines or untreated for suspended cell lines. Round (U), Flat and V bottom plates are available as well.

All Nest cell culture plates feature alphanumeric markings to make it easy to keep track of cultures. Each well also features a raised rim to reduce evaporation and cross-contamination between wells. Plates also feature grooves and feet for stable stacking. They also feature an SBS/ANSI footprint which makes them compatible with automated plate handlers and ideal for high throughput work.

Manufactured in an ISO 13485 and cGMP (21 CFR part 820) plant.

描述

產品詳情 Introduction

· 高透明度，聚苯乙烯

· 設計尺寸符合ANSI-SBS格式

· 板蓋切角設計並附有冷凝環，減少污染機會

· 底部平整清晰，每孔均編碼標識，易於區分觀察

· 板側齒狀設計，方便拿取；底沿凸點移動，防噪音

· 無熱原，無內毒素，無DNase/RNase

· 電子束滅菌，SAL=10^-6

*經真空等離子TC處理後適用於貼壁細胞培養，未TC表面適用於懸浮細胞培養。

Introduction

• Sterilized by E-beam, SAL=10-6.

• High clarity, 100% virgin polystyrene.

• The configuration complies with the ANSI-SBS format.

• The plate lid is designed with cut corners and a condensation ring, reducing the risk of contamination.

• Non-Pyrogenic, DNase/Rnase free.

• The bottom is flat and clear, with each hole labeled for easy differentiation.

• The plate features a non-slip ridge on the side for easy gripping, while the protruding points on the bottom help to prevent noise during transfer

703002 Cell Culture Plate 細胞培養板 6 Wells, Clear, Flat Bottom, TC, Sterile

Mon, 25 May 2026 02:20:10 GMT

貨號

703002

6 Wells, Clear, Flat Bottom, TC, Sterile

6孔 TC

產品訊息

Manufactured in an ISO 13485 and cGMP (21 CFR part 820) plant.

描述

產品詳情 Introduction

· 高透明度，聚苯乙烯

· 設計尺寸符合ANSI-SBS格式

· 板蓋切角設計並附有冷凝環，減少污染機會

· 底部平整清晰，每孔均編碼標識，易於區分觀察

· 板側齒狀設計，方便拿取；底沿凸點移動，防噪音

· 無熱原，無內毒素，無DNase/RNase

· 電子束滅菌，SAL=10^-6

*經真空等離子TC處理後適用於貼壁細胞培養，未TC表面適用於懸浮細胞培養。

Introduction

• Sterilized by E-beam, SAL=10-6.

• High clarity, 100% virgin polystyrene.

• The configuration complies with the ANSI-SBS format.

• The plate lid is designed with cut corners and a condensation ring, reducing the risk of contamination.

• Non-Pyrogenic, DNase/Rnase free.

• The bottom is flat and clear, with each hole labeled for easy differentiation.

• The plate features a non-slip ridge on the side for easy gripping, while the protruding points on the bottom help to prevent noise during transfer

703011 Cell Culture Plate 細胞培養板 6 Wells, Clear, Flat Bottom, Non-TC, Sterile

Mon, 25 May 2026 02:16:46 GMT

貨號

703011

6 Wells, Clear, Flat Bottom, Non-TC, Sterile

6孔未TC 泡殼裝

產品訊息

Manufactured in an ISO 13485 and cGMP (21 CFR part 820) plant.

描述

產品詳情 Introduction

· 高透明度，聚苯乙烯

· 設計尺寸符合ANSI-SBS格式

· 板蓋切角設計並附有冷凝環，減少污染機會

· 底部平整清晰，每孔均編碼標識，易於區分觀察

· 板側齒狀設計，方便拿取；底沿凸點移動，防噪音

· 無熱原，無內毒素，無DNase/RNase

· 電子束滅菌，SAL=10^-6

*經真空等離子TC處理後適用於貼壁細胞培養，未TC表面適用於懸浮細胞培養。

Introduction

• Sterilized by E-beam, SAL=10-6.

• High clarity, 100% virgin polystyrene.

• The configuration complies with the ANSI-SBS format.

• The plate lid is designed with cut corners and a condensation ring, reducing the risk of contamination.

• Non-Pyrogenic, DNase/Rnase free.

• The bottom is flat and clear, with each hole labeled for easy differentiation.

• The plate features a non-slip ridge on the side for easy gripping, while the protruding points on the bottom help to prevent noise during transfer

725331 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, Non-TC, Sterile

Thu, 21 May 2026 01:52:11 GMT

貨號

725331

24孔板+12小室，8 μm孔徑PET(聚酯)膜，透明，未TC，滅菌

24 Well Plate+12 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, Non-TC, Sterile

產品訊息

細胞小室在細胞實驗中常用，如：共培養實驗、趨化實驗、細胞遷移實驗、細胞侵襲、藥物轉運。其中，通透性支持物可以有效改善極性細胞的培養，因為這些支持物允許細胞從其基底面和頂面分泌和吸收分子，從而以更為自然的方式進行代謝，最大程度的模擬體內環境以培養某些特殊的細胞系。

Cell and tissue culture technologies have an increasing importance in the fields of basic and applied life science. New culture vessels and new surfaces for cell adsorption are continuously emerging, in order to simulate the internal environment as much as possible for culture of some special cell lines. Logically, using permeable supports with a microporous membrane becomes the basic method for culturing these cells. Permeable supports may effectively improve the culture of polar cells, because these supports allow cells to secrete on and absorb molecules from their basal and apical surfaces to metabolize in a more natural way, as well as to stimulate the in vivo environment to the maximum extent for culturing of some special cell lines.

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight. • Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage. Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.• Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725321 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, TC, Sterile

Thu, 21 May 2026 01:51:28 GMT

貨號

725321

24孔板+12小室，8 μm孔徑PET(聚酯)膜，透明，TC，滅菌

24 Well Plate+12 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725311 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:50:41 GMT

貨號

725311

24孔板+12小室，8 μm孔徑PC(聚碳酸酯)膜，半透明，未TC，滅菌

24 Well Plate+12 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725301 Cell Culture Insert 細胞小室培養板 24-Well Plate+12 Inserts, 8 μm Pore Size PC (Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:50:13 GMT

貨號

725301

24孔板+12小室，8 μm孔徑PC(聚碳酸酯)膜，半透明，TC，滅菌

24-Well Plate+12 Inserts, 8 μm Pore Size PC (Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724331 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, Non-TC, Sterile

Thu, 21 May 2026 01:48:17 GMT

貨號

724331

12孔板+12小室，8 μm孔徑PET(聚酯)膜，全透明，未TC，滅菌

12 Well Plate+12 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724321 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, TC, Sterile

Thu, 21 May 2026 01:46:55 GMT

貨號

724321

12孔板+12小室，8 μm孔徑PET(聚酯)膜，全透明，TC，滅菌

12 Well Plate+12 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724311 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:46:03 GMT

貨號

724311

12孔板+12小室，8 μm孔徑PC(聚碳酸酯)膜，半透明，未TC，滅菌

12 Well Plate+12 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724301 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:45:17 GMT

貨號

724301

12孔板+12小室，8 μm孔徑PC(聚碳酸酯)膜，半透明，TC，滅菌

12 Well Plate+12 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723331 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, Non-TC, Sterile

Thu, 21 May 2026 01:43:29 GMT

貨號

723331

6孔板+6小室，8 μm孔徑PET(聚酯)膜，透明，未TC，滅菌

6 Well Plate+6 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723321 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, TC, Sterile

Thu, 21 May 2026 01:42:19 GMT

貨號

723321

6孔板+6小室，8 μm孔徑PET(聚酯)膜，透明，TC，滅菌

6 Well Plate+6 Inserts, 8 μm Pore Size PET(Polyester) Membrane, Transparent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723311 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:41:19 GMT

貨號

723311

6孔板+6小室，8 μm孔徑PC(聚碳酸酯)膜，半透明，未TC，滅菌

6 Well Plate+6 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723301 Cell Culture Insert 細胞小室培養板6 Well Plate+6 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:40:14 GMT

貨號

723301

6孔板+6小室，8 μm孔徑PC(聚碳酸酯)膜，半透明，TC，滅菌

6 Well Plate+6 Inserts, 8 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725211 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 5 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:35:30 GMT

貨號

725211

24孔板+12小室，5 μm孔徑PC(聚碳酸酯)膜，半透明，未TC，滅菌

24 Well Plate+12 Inserts, 5 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725201 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 5 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:34:26 GMT

貨號

725201

24孔板+12小室，5 μm孔徑PC(聚碳酸酯)膜，半透明，TC，滅菌

24 Well Plate+12 Inserts, 5 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724211 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 5 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:32:46 GMT

貨號

724211

12孔板+12小室，5 μm孔徑PC(聚碳酸酯)膜，半透明，未TC，滅菌

12 Well Plate+12 Inserts, 5 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724201 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 5 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:29:19 GMT

貨號

724201

12孔板+12小室，5 μm孔徑PC(聚碳酸酯)膜，半透明，TC，滅菌

12 Well Plate+12 Inserts, 5 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

726001 Cell Culture Dish With Inserts 細胞小室培養皿 100 mm, 3 μm Pore Size PC (Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:27:13 GMT

貨號

726021

100mm 3μm孔徑PC（聚碳酸酯）膜帶蓋TC

100 mm, 3 μm Pore Size PC (Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的加樣設計，加樣方便

• 嵌套通用性強可搭配多款品牌

• PC膜，低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜透明度佳，具有較好的光學清晰度，方便觀察細胞狀態

• 膜材通過SUP Vi級毒性測試，用於醫療器材領域

• 無細胞毒素、無熱原

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

725031 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:22:00 GMT

貨號

725031

24孔板+12小室，3 μm孔徑PET(聚酯)膜，半透明，未TC，滅菌

24 Well Plate+12 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725021 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:21:04 GMT

貨號

725021

24孔板+12小室，3 μm孔徑PET(聚酯)膜，半透明，TC，滅菌

24 Well Plate+12 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725011 Cell Culture Insert 細胞小室培養板 24Well Plate+12 Inserts, 3 μm Pore Size PC (Polycarbonate) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:20:02 GMT

貨號

725011

24孔板+12小室，3 μm孔徑PC(聚碳酸酯)膜，半透明，未TC，滅菌

24Well Plate+12 Inserts, 3 μm Pore Size PC (Polycarbonate) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725001 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:18:54 GMT

貨號

725001

24孔板+12小室，3 μm孔徑PC(聚碳酸酯)膜，半透明，TC，滅菌

24 Well Plate+12 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724031 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:17:09 GMT

貨號

724031

12孔板+12小室，3 μm孔徑PET(聚酯)膜，半透明，未TC，滅菌

12 Well Plate+12 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724021 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:16:15 GMT

貨號

724021

12孔板+12小室，3 μm孔徑PET(聚酯)膜，半透明，TC，滅菌

12 Well Plate+12 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724011 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:14:41 GMT

貨號

724011

12孔板+12小室，3 μm孔径PC(聚碳酸酯)膜，半透明，未TC，滅菌

12 Well Plate+12 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724001 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:13:21 GMT

貨號

724001

12孔板+12小室，3 μm孔径PC(聚碳酸酯)膜，半透明，TC，滅菌

12 Well Plate+12 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723031 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:11:36 GMT

貨號

723031

6孔板+6小室，3 μm孔徑PET(聚酯)膜，半透明，未TC，滅菌

6 Well Plate+6 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723021 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:10:04 GMT

貨號

723021

6孔板+6小室，3 μm孔徑PET(聚酯)膜，半透明，TC，滅菌

6 Well Plate+6 Inserts, 3 μm Pore Size PET(Polyester) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723011 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

Thu, 21 May 2026 01:09:09 GMT

貨號

723011

6孔板+6小室，3 μm孔徑PC(聚碳酸酯)膜，半透明，未TC，滅菌

6 Well Plate+6 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723001 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

Thu, 21 May 2026 01:07:55 GMT

貨號

723001

24孔板+12小室，1 μm孔徑PET(聚酯)膜，不透款，未TC，滅菌

6 Well Plate+6 Inserts, 3 μm Pore Size PC(Polycarbonate) Membrane, Translucent, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725431 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

Thu, 21 May 2026 01:06:03 GMT

貨號

725431

24孔板+12小室，1 μm孔徑PET(聚酯)膜，不透款，未TC，滅菌

24 Well Plate+12 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725421 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

Thu, 21 May 2026 01:04:40 GMT

貨號

725421

24孔板+12小室，1 μm孔徑PET(聚酯)膜，不透款，TC，滅菌

24 Well Plate+12 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724431 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

Thu, 21 May 2026 01:02:48 GMT

貨號

724431

12孔板+12小室，1 μm孔徑PET(聚酯)膜，不透款，未TC，滅菌

12 Well Plate+12 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724421 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

Thu, 21 May 2026 01:01:32 GMT

貨號

724421

12孔板+12小室，1 μm孔徑PET(聚酯)膜，不透款，TC，滅菌

12 Well Plate+12 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723431 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

Thu, 21 May 2026 00:59:43 GMT

貨號

723431

6孔板+6小室，1 μm孔徑PET(聚酯)膜，不透款，TC，滅菌

6 Well Plate+6 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723421 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

Thu, 21 May 2026 00:57:48 GMT

貨號

723421

6孔板+6小室，1 μm孔徑PET(聚酯)膜，不透款，TC，滅菌

6 Well Plate+6 Inserts, 1 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725131 Cell Culture Insert 細胞小室培養板 24Well Plate+12 Inserts, 0.4 μm Pore Size PET (Polyester) Membrane, Opaque, Non-TC, Sterile

Thu, 21 May 2026 00:55:45 GMT

貨號

725131

24孔板+12小室，0.4 μm孔徑PET(聚酯)膜，不透明，未TC，滅菌

24Well Plate+12 Inserts, 0.4 μm Pore Size PET (Polyester) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725121 Cell Culture Insert 細胞小室培養板 24Well Plate+12 Inserts, 0.4 μm Pore Size PET (Polyester) Membrane, Opaque, TC, Sterile

Thu, 21 May 2026 00:54:36 GMT

貨號

725121

24孔板+12小室，0.4 μm孔徑PET(聚酯)膜，不透明，TC，滅菌

24Well Plate+12 Inserts, 0.4 μm Pore Size PET (Polyester) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725111 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, Non-TC, Sterile

Thu, 21 May 2026 00:50:54 GMT

貨號

725111

24孔板+12小室，0.4 μm孔徑PC(聚碳酸酯)薄膜，不透明，未TC，滅菌

24 Well Plate+12 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

725101 Cell Culture Insert 細胞小室培養板 24 Well Plate+12 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, TC, Sterile

Thu, 21 May 2026 00:49:23 GMT

貨號

725101

24孔板+12小室，0.4 μm孔徑PC(聚碳酸酯)薄膜，不透明，TC，滅菌

24 Well Plate+12 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724131 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 0.4 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

Thu, 21 May 2026 00:47:07 GMT

貨號

724131

12孔板+12小室，0.4 μm孔徑PET(聚酯)膜，不透明，未TC，滅菌

12 Well Plate+12 Inserts, 0.4 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724121 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 0.4 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

Thu, 21 May 2026 00:46:00 GMT

貨號

724121

12孔板+12小室，0.4 μm孔徑PET(聚酯)膜，不透明，TC，滅菌

12 Well Plate+12 Inserts, 0.4 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724111 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, Non-TC, Sterile

Thu, 21 May 2026 00:44:41 GMT

貨號

724111

12孔板+12小室，0.4 μm孔徑PC(聚碳酸酯)薄膜，不透明，未TC，滅菌

12 Well Plate+12 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

724101 Cell Culture Insert 細胞小室培養板 12 Well Plate+12 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, TC, Sterile

Thu, 21 May 2026 00:36:01 GMT

貨號

724101

12孔板+12小室，0.4 μm孔徑PC(聚碳酸酯)薄膜，不透明，TC，滅菌

12 Well Plate+12 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723131 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 0.4 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

Wed, 20 May 2026 07:13:09 GMT

貨號

723131

6孔板+6小室，0.4 μm孔徑PET(聚酯)膜，不透明，未TC，滅菌

6 Well Plate+6 Inserts, 0.4 μm Pore Size PET(Polyester) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723121 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 0.4 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

Wed, 20 May 2026 07:11:02 GMT

貨號

723121

6孔板+6小室，0.4 μm孔徑PET(聚酯)膜，不透明，TC，滅菌

6 Well Plate+6 Inserts, 0.4 μm Pore Size PET(Polyester) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723111 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, Non-TC, Sterile

Wed, 20 May 2026 07:08:53 GMT

貨號

723111

6孔板+6小室，0.4 μm孔徑PC(聚碳酸酯)薄膜，不透明，未TC，滅菌

6 Well Plate+6 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, Non-TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

723101 Cell Culture Insert 細胞小室培養板 6 Well Plate+6 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, TC, Sterile

Wed, 20 May 2026 06:08:03 GMT

貨號

723101

6孔板+6小室，0.4 μm孔徑PC(聚碳酸酯)薄膜，不透明，TC，滅菌

6 Well Plate+6 Inserts, 0.4 μm Pore Size PC(Polycarbonate) Membrane, Opaque, TC, Sterile

產品訊息

描述

產品詳情 Introduction

• 創新的邊緣設計，加樣方便

• PC膜：低吸附率，減少小分子蛋白和其他化合物的流失

• PET膜具有較好的光學清晰度，方便觀察細胞狀態

• 與大部分固定與染色時使用的溶劑相容

Introduction

• Sterilized by E-beam, SAL=10-6.

• Vacuum Plasma tissue culture treatment.

• Non-Pyrogenic, DNase/Rnase free.

• A rich selection of matching plates: 6-well, 12-well, 24-well.

• Passed the USP VI toxicity test.

• Cell culture plates are made of high clarity, 100% virgin polystyrene.

• Clear lot number for batch traceability.

• Innovative edge design for convenient sample loading.

• Low protein binding to ensure accurate results.

• Compatible with most solvents used for fixing and staining.

Attention：

• Attachment of cells grown on a permeable support (membrane) is sensitive to the initial seeding density, so the initial use should be inoculated with different density guarantee optimal growth;

•During the cultivation process, the liquid should be taken through the gap between the upper layer and the hole. When adding liquid, be careful and slow to avoid the damage of the membrane;

•Incubation of the permeable support in the medium prior to culturing the cells can improve cell attachment and distribution.

Guidelines for us：

• Pre-equilibration: After added culture solution to the pores of the multi-well plate and inserted the insert, please placed it in the incubator for at least one hour or overnight.

• Check the volume of the culture medium regularly and add fresh medium as needed.

• The cell layer can be directly fixed and stained in the nest using basic cytological methods. Note Avoid using solvents that dissolve the PC film.

• Fix and stain cells directly in the nest, and use a scalpel to cut the membrane for long-term storage.

Before using please add culture solution to the pores of the multi-well plate, then insert the insert and add the culture solution which included cells to the insert.

771209 TriSteri™ Ultra-low Particulate Collection 超低微粒產品系列5 Chambers, 2 Wide Mouth Caps, TC, Sterile，Ultra-low Particulate

Wed, 20 May 2026 05:46:45 GMT

貨號

771209

5層，雙大口，TC，滅菌, 超低微粒

5 Chambers, 2 Wide Mouth Caps, TC, Sterile，Ultra-low Particulate

產品訊息

對於常規的標準包裝而言，附著在包裝袋外部的污染物可能會不經意地進入無塵室區域。三層包裝產品可以滿足越來越多的無塵室需求。產品的外包裝可防止污染物接觸到敏感的生產區，從而顯著提高在無菌環境中處理樣本的安全性。

Regular packaging may unintentionally introduce pollutants into the cleanroom area if pollutants adhere to the outside of the packaging bag. However, triple packaging of TriSteri TM Ultra-low Particulate Collection are designed to meet the higher demands of cleanrooms. The outer packaging acts as a barrier, preventing pollutants from entering sensitive production areas and greatly enhancing the safety of samples in a sterile environment.

描述

產品詳情 Introduction

產品品質檢驗

• 每批產品均參考中國藥典進行不溶性微粒檢測

• 所有的產品均進行2次外觀檢測，確保流出的每一個產品均無可視異物

• 每款產品的最小包裝均有批號標記，方便產品的品質查詢

體系認證

• 符合 ISO 13485(醫療器材品質管理系統)及ISO 9001認證

• 無菌濃度達SAL10-6，無DNase/RNase，無內毒素，無細胞毒性

生產環境

• 十萬級、局部百級潔淨環境下生產、包裝

• 包裝原料為萬級生產環境

原料驗證

• 所有的射出成型件均採用醫用級原料生產

Introduction

Triple Packed Products for clean room applications Triple packed products are used where sterile transfer of products is essential. Contamination adhering to the outside of the bag can be carried into clean room areas with single packaging. Therefore, all single packed materials must be wiped clean with 70 % alcohol or other disinfectant. Triple packed products eliminate the need for such cleaning procedures. It prevents contamination from reaching highly sensitive production areas, simplify handling and reduce processing time.

771109 TriSteri™ Ultra-low Particulate Collection 超低微粒產品系列 2 Chambers, 2 Wide Mouth Caps, TC, Sterile，Ultra-low Particulate

Wed, 20 May 2026 05:45:35 GMT

貨號

771109

2層，雙大口，TC，滅菌, 超低微粒

2 Chambers, 2 Wide Mouth Caps, TC, Sterile，Ultra-low Particulate

產品訊息

描述

產品詳情 Introduction

產品品質檢驗

• 每批產品均參考中國藥典進行不溶性微粒檢測

• 所有的產品均進行2次外觀檢測，確保流出的每一個產品均無可視異物

• 每款產品的最小包裝均有批號標記，方便產品的品質查詢

體系認證

• 符合 ISO 13485(醫療器材品質管理系統)及ISO 9001認證

• 無菌濃度達SAL10-6，無DNase/RNase，無內毒素，無細胞毒性

生產環境

• 十萬級、局部百級潔淨環境下生產、包裝

• 包裝原料為萬級生產環境

原料驗證

• 所有的射出成型件均採用醫用級原料生產

Introduction

708009 TriSteri™ Ultra-low Particulate Collection 超低微粒產品系列 75 cm², Vent Cap, TC, Sterile, Ultra-low Particulate

Wed, 20 May 2026 05:33:39 GMT

貨號

708009

75 cm²，透氣蓋，TC，滅菌，超低微粒

75 cm², Vent Cap, TC, Sterile, Ultra-low Particulate

產品訊息

描述

產品詳情 Introduction

產品品質檢驗

• 每批產品均參考中國藥典進行不溶性微粒檢測

• 所有的產品均進行2次外觀檢測，確保流出的每一個產品均無可視異物

• 每款產品的最小包裝均有批號標記，方便產品的品質查詢

體系認證

• 符合 ISO 13485(醫療器材品質管理系統)及ISO 9001認證

• 無菌濃度達SAL10-6，無DNase/RNase，無內毒素，無細胞毒性

生產環境

• 十萬級、局部百級潔淨環境下生產、包裝

• 包裝原料為萬級生產環境

原料驗證

• 所有的射出成型件均採用醫用級原料生產

Introduction

602852 PBMC Separation Tube 週邊血淋巴細胞分離管 50 mL, Recommended Sample Volume 13-30 mL, Sterile

Wed, 20 May 2026 05:18:57 GMT

貨號

602852

建議樣本量：13-30 mL

50 mL, Recommended Sample Volume 13-30 mL, Sterile

產品訊息

本品採用密度梯度離心法，依細胞密度差異，藉由分離液和離心，進行細胞分離純化。細胞分離液產生一定程度的密度梯度，經過離心後，紅血球、粒細胞沉於管底；PBMC（單一核細胞，包括淋巴球和單核球等）漂浮於分離液的液面上，目的細胞保留在設計的嵌套之上，分離管中獨特的嵌套，能夠最大程度的減少目的樣品和密度，而無需傾梯的專業操作，最後只需從離心管中簡單操作的專業操作而無需傾心管中。

This product separates and purifies cells with separation solution by means of density gradient centrifugation according to the difference in cell density. With the density gradients generated inside, the target cells can be retained on top of the nested container in the tub, which is designed specifically to separate the target sample from the density gradient medium to the utmost extent; while erythrocytes and granulocytes will sink at the bottom after centrifugation, and the PBMC (Peripheral Blood Mononuclear Cell, including lymphocytes and monocytes, etc.) will float on the surface. Only the simple operation of decanting is involved in the final stage, and no other professionally technical operations required.

描述

產品詳情 Introduction

使用方法/ Instructions

前期準備

(1) 將分離液的溫度平衡至室溫（RT），避光。

(2) 將分離液以移液管從分離管嵌套的中心孔中加入：15ml的分離管需加入約4ml分離液；50ml的分離管需加入約13ml分離液，確保分離液覆蓋嵌套上方。

(3) 平衡至室溫後的分離管就可以加入抽取的抗凝血和骨髓了。雖然加入稀釋標本的生理食鹽水不是十分必要，但它能幫助提高分離效果。

分離過程

　　　加入細胞分離液　　　　　加入樣本　　　　離心後分層　　收集富集細胞、重複洗滌

(1) 將抗凝血樣本（血液或骨髓，如果需要可以用生理食鹽水稀釋）延管壁緩慢倒入或用移液管延管壁緩慢加入到分離管中：如果用15ml的分離管建議使用4-9ml樣本；如果用50ml的分離管建議使用13-30ml樣本。

(2) 室溫離心，離心力為1200 x g需10分鐘，關閉離心機。對於放置24h以上的樣品，建議離心時間加長。

(3) 離心後液體分離情況（由上到下）為：a血漿；b富集的細胞部分（中間相包含淋巴細胞/PBMCs細胞）；c分離液；d嵌套；e沉澱物（紅血球和粒細胞）。採集或丟棄富集細胞所在層以上5到10mm的血漿層有助於防止富集細胞被血小板再次污染。

(4) 收穫富集細胞（淋巴球/PBMCs細胞），將分離管中上清倒入另一乾淨離心管中，分離管內的嵌套能有效避免富集細胞被紅血球和粒細胞再次污染。建議不要將分離管倒置2s以上。

(5) 以磷酸鹽緩衝液（PBS）洗滌富集細胞（淋巴球/PBMCs細胞），然後在250 x g離心力下離心10分鐘。

(6) 依步驟5重複洗滌2次，最後用5ml PBS緩衝液重新懸浮細胞。

注意事項/ Cautions

(1) 本產品應由經過專業訓練的人員操作，並遵守良好的實驗室規範。

(2) 請勿重複使用分離管。

(3) 由於各品牌離心機的性能不同，地區溫度環境差異，可能影響分離效果，使用者可以調節離心轉速和離心的時間，摸索最佳的分離條件（具體分離條件由各實驗室自定）。

(4) 可用於人類週邊血、骨髓和臍帶血樣本。它不適用於白血球分離樣本、血沉棕黃層樣本或超過48小時的樣本。

(5) 離心後，細胞可能聚集在富集層以上的分離管的管壁上。這種聚合是正常的，受樣本品質、樣本放置時間和抗凝血劑類型的影響。此聚合與分離管的使用無關。細胞可以透過使用移液管尖端刮管壁的一側來清除。

(6) 處理任何生物來源的標本，使用採血針、採血管系列、相關儀器等一定要注意以嚴格的操作規程使用。請把標本當成可能感染 HIV、HBV、HCV等傳染病的危險物質處理。為避免操作時感染的危險，請使用一次性手套。

Introduction

Features

• Rapid separation and purification for PBMC within only 15 min.

• Simple operation procedures: no need to slowly and laboriously add samples into the solution; when collecting samples, simply decant the

centrifuge tube. No other professionally technical operations are required.

• Good reproducibility for reduced errors and less operation variation among users.

• E-beam sterilized with SAL=106.

• Pyrogen free,nucleases free.

Usages and Application Directions

Peripheral Blood Lymphocyte Separation Tube is mainly applied to separate Peripheral Blood Mononuclear Cell (lymphocytes and

monocytes) from whole blood or bone marrow through density gradient centrifugation. For research use only.

602851 PBMC Separation Tube 週邊血淋巴細胞分離管 50 mL, Recommended Sample Volume 13-30 mL, Sterile

Wed, 20 May 2026 03:05:33 GMT

貨號

602851

建議樣本量：13-30 mL

50 mL, Recommended Sample Volume 13-30 mL, Sterile

產品訊息

描述

產品詳情 Introduction

使用方法/ Instructions

前期準備

(1) 將分離液的溫度平衡至室溫（RT），避光。

(2) 將分離液以移液管從分離管嵌套的中心孔中加入：15ml的分離管需加入約4ml分離液；50ml的分離管需加入約13ml分離液，確保分離液覆蓋嵌套上方。

(3) 平衡至室溫後的分離管就可以加入抽取的抗凝血和骨髓了。雖然加入稀釋標本的生理食鹽水不是十分必要，但它能幫助提高分離效果。

分離過程

　　　加入細胞分離液　　　　　加入樣本　　　　離心後分層　　收集富集細胞、重複洗滌

(2) 室溫離心，離心力為1200 x g需10分鐘，關閉離心機。對於放置24h以上的樣品，建議離心時間加長。

(5) 以磷酸鹽緩衝液（PBS）洗滌富集細胞（淋巴球/PBMCs細胞），然後在250 x g離心力下離心10分鐘。

(6) 依步驟5重複洗滌2次，最後用5ml PBS緩衝液重新懸浮細胞。

注意事項/ Cautions

(1) 本產品應由經過專業訓練的人員操作，並遵守良好的實驗室規範。

(2) 請勿重複使用分離管。

(4) 可用於人類週邊血、骨髓和臍帶血樣本。它不適用於白血球分離樣本、血沉棕黃層樣本或超過48小時的樣本。

Introduction

Features

• Rapid separation and purification for PBMC within only 15 min.

• Simple operation procedures: no need to slowly and laboriously add samples into the solution; when collecting samples, simply decant the

centrifuge tube. No other professionally technical operations are required.

• Good reproducibility for reduced errors and less operation variation among users.

• E-beam sterilized with SAL=106.

• Pyrogen free,nucleases free.

Usages and Application Directions

Peripheral Blood Lymphocyte Separation Tube is mainly applied to separate Peripheral Blood Mononuclear Cell (lymphocytes and

monocytes) from whole blood or bone marrow through density gradient centrifugation. For research use only.

601852 PBMC Separation Tube 週邊血淋巴細胞分離管 15 mL, Recommended Sample Volume 4-9 mL, Sterile

Wed, 20 May 2026 02:58:57 GMT

貨號

601852

建議樣本量：4-9 mL

15 mL, Recommended Sample Volume 4-9 mL, Sterile

產品訊息

描述

產品詳情 Introduction

使用方法/ Instructions

前期準備

(1) 將分離液的溫度平衡至室溫（RT），避光。

(2) 將分離液以移液管從分離管嵌套的中心孔中加入：15ml的分離管需加入約4ml分離液；50ml的分離管需加入約13ml分離液，確保分離液覆蓋嵌套上方。

(3) 平衡至室溫後的分離管就可以加入抽取的抗凝血和骨髓了。雖然加入稀釋標本的生理食鹽水不是十分必要，但它能幫助提高分離效果。

分離過程

　　　加入細胞分離液　　　　　加入樣本　　　　離心後分層　　收集富集細胞、重複洗滌

(2) 室溫離心，離心力為1200 x g需10分鐘，關閉離心機。對於放置24h以上的樣品，建議離心時間加長。

(5) 以磷酸鹽緩衝液（PBS）洗滌富集細胞（淋巴球/PBMCs細胞），然後在250 x g離心力下離心10分鐘。

(6) 依步驟5重複洗滌2次，最後用5ml PBS緩衝液重新懸浮細胞。

注意事項/ Cautions

(1) 本產品應由經過專業訓練的人員操作，並遵守良好的實驗室規範。

(2) 請勿重複使用分離管。

(4) 可用於人類週邊血、骨髓和臍帶血樣本。它不適用於白血球分離樣本、血沉棕黃層樣本或超過48小時的樣本。

Introduction

Features

• Rapid separation and purification for PBMC within only 15 min.

• Simple operation procedures: no need to slowly and laboriously add samples into the solution; when collecting samples, simply decant the

centrifuge tube. No other professionally technical operations are required.

• Good reproducibility for reduced errors and less operation variation among users.

• E-beam sterilized with SAL=106.

• Pyrogen free,nucleases free.

Usages and Application Directions

Peripheral Blood Lymphocyte Separation Tube is mainly applied to separate Peripheral Blood Mononuclear Cell (lymphocytes and

monocytes) from whole blood or bone marrow through density gradient centrifugation. For research use only.

601851 PBMC Separation Tube 週邊血淋巴細胞分離管 15 mL, Recommended Sample Volume 4-9 mL, Sterile

Wed, 20 May 2026 02:44:27 GMT

貨號

601851

建議樣本量：4-9 mL

15 mL, Recommended Sample Volume 4-9 mL, Sterile

產品訊息

描述

產品詳情 Introduction

使用方法/ Instructions

前期準備

(1) 將分離液的溫度平衡至室溫（RT），避光。

(2) 將分離液以移液管從分離管嵌套的中心孔中加入：15ml的分離管需加入約4ml分離液；50ml的分離管需加入約13ml分離液，確保分離液覆蓋嵌套上方。

(3) 平衡至室溫後的分離管就可以加入抽取的抗凝血和骨髓了。雖然加入稀釋標本的生理食鹽水不是十分必要，但它能幫助提高分離效果。

分離過程

　　　加入細胞分離液　　　　　加入樣本　　　　離心後分層　　收集富集細胞、重複洗滌

(2) 室溫離心，離心力為1200 x g需10分鐘，關閉離心機。對於放置24h以上的樣品，建議離心時間加長。

(5) 以磷酸鹽緩衝液（PBS）洗滌富集細胞（淋巴球/PBMCs細胞），然後在250 x g離心力下離心10分鐘。

(6) 依步驟5重複洗滌2次，最後用5ml PBS緩衝液重新懸浮細胞。

注意事項/ Cautions

(1) 本產品應由經過專業訓練的人員操作，並遵守良好的實驗室規範。

(2) 請勿重複使用分離管。

(4) 可用於人類週邊血、骨髓和臍帶血樣本。它不適用於白血球分離樣本、血沉棕黃層樣本或超過48小時的樣本。

Introduction

Features

• Rapid separation and purification for PBMC within only 15 min.

• Simple operation procedures: no need to slowly and laboriously add samples into the solution; when collecting samples, simply decant the

centrifuge tube. No other professionally technical operations are required.

• Good reproducibility for reduced errors and less operation variation among users.

• E-beam sterilized with SAL=106.

• Pyrogen free,nucleases free.

Usages and Application Directions

Peripheral Blood Lymphocyte Separation Tube is mainly applied to separate Peripheral Blood Mononuclear Cell (lymphocytes and

monocytes) from whole blood or bone marrow through density gradient centrifugation. For research use only.

258367 Cell Strainer 不可疊加細胞篩 100 μm, 150 Mesh, Sterile

Wed, 20 May 2026 02:33:32 GMT

貨號

258367

不可疊加 100μm 袋裝

100 μm, 150 Mesh, Sterile

產品訊息

NEST細胞過濾器經過電子束滅菌，過濾快、使用便捷，用於從組織中分離原代細胞，持續獲得形狀性能一致的單細胞懸浮液。常用於器官培養、組織轉運或移植，特別適用於幹細胞和原代細胞過濾，常與流式細胞儀搭配使用，是流式細胞分選實驗最佳選擇。

應用：

•從骨髓、胰臟、胸腺、扁桃體和淋巴結中分離的血球過濾獲得單一細胞懸浮液

•製備樣本用於原代細胞培養和免疫原樣本的準備

•過濾失活血清所產生的黏性蛋白的過濾

•樣本雜質、細胞碎片的過濾

•流式細胞儀樣品預處理

Product Application

The NEST cell strainer series can separate primary cells from tissues, continuously obtaining single-cell suspensions with consistent shape and performance.

Application Directions:

• Filtration of sample impurities;

• Preparation of single-cell suspension samples for flow cytometry analysis, including: a) Blood cells from bone marrow, pancreas, thymus, tonsils, and lymph nodes; b) Stem cells, cells from enzyme-digested mammalian tissues or organoids, and cancer cells;

• Cleaning of cell suspensions before cell passaging, counting, analysis, or cryopreservation;

• Preparation of primary cell cultures and immunogen samples;

• Sample preparation before cryopreservation;

• Removal of sticky proteins generated during serum inactivation;

• Compatible with flow cytometers.

描述

產品詳情 Introduction

· 篩網面積大，過濾速率高，可搭配市面上大部分品牌的50mL離心管

· 框架採用聚丙烯（PP）材質，篩網採用尼龍材質，符合USP Class VI標準

· 聚丙烯框架可著色標記，易於操作和分辨

· 網面平整，網孔大小均勻分佈，確保結果的一致性與可靠性

· 40μm、70μm、100μm三種孔徑可選，搭配不同顏色（藍、白、黃），方便區分

· 獨特的手把設計，方便拿取，降低污染風險

· 無菌獨立包裝，無核酸酶（DNase/RNase）、無內毒素、無細胞毒性

Features

• Frame made of polypropylene (PP) and mesh made of nylon, both compliant with USP Class VI standards;

• The polypropylene frame can be color-coded for easy operation and differentiation;

• The mesh surface is flat, with evenly distributed pore sizes to ensure consistency and reliability of results;

• Available in three pore sizes: 40μm, 70μm, and 100μm, matched with different colors (blue, white, yellow) for easy identification;

• Unique handle design for convenient handling and reduced risk of contamination;

• Non-stackable cell strainers with large mesh area and high filtration rate, compatible with most 50ml centrifuge tubes on the market;

• Sterile individual packaging, free from RNase, DNase, endotoxins, and cytotoxicity.

304006 Pipette Tips 吸頭 1000 μL Extra Long, Clear Blue, No Filter, Non-Sterile

Wed, 20 May 2026 02:31:15 GMT

貨號

304006

1000 μL加長，透明藍，無濾芯，未滅菌

1000 μL Extra Long, Clear Blue, No Filter, Non-Sterile

產品訊息

NEST優秀的通用移液吸頭、濾芯吸頭採用醫用級聚丙烯材料，在十萬級無塵室環境下製造，採用精密的模具，加上專業的製造方法，確保我們的吸頭的匹配性和光滑性來滿足市場客戶的需求。

NEST Pipette Tips are ultra-clear and fit universally the most pipettes. Made from 100% polypropylene, low-retention plastic, these tips ensure accurate sample results during liquid handling. The Nest Pipette Tip package production line is Rnase/Dnase, pyrogen free. The pipettes of the following specifications :10 μL, 100 μL, 200 μL, 300 μL, 1000 μL and 1250 μL are available.

描述

產品詳情 Introduction

•標準尺寸：適用於市面上常用移液器

•內壁光滑：液體殘留降到最低、確保吸液的準確性

•優質原料：進口PP料，符合USP Class VI標準

•優質濾芯：選用純淨超高分子聚乙烯，獨特的加工工藝

•超強疏水性：疏水濾芯對氣溶膠形成堅固的屏障，消除樣品與移液管交叉污染風險

•優化孔徑：確保樣品吸取流暢

•先進技術：超精細打磨成型技術，無需脫模劑脫模，保證了更好的產品品質

•創新設計：確保產品良好的柔軟度、密封性和相容性

•標準工場：十萬級無塵車間，確保產品無熱原、無Dnase/Rnase

•透明度佳：具有良好的透明度、方便使用時觀察液面

•耐有機溶劑：可用於各種有機溶劑的吸取

•獨立標識：每個包裝都有獨立的貨號標識，方便品質追蹤和溯源

Introduction

• Standard size: suitable for major pipettes on the market.

• Smooth interior: minimizes residue and ensures accurate pipetting.

• High-quality materials: the imported PP materials is in line with USP Class VI.

• High-quality filter: pure UHMW polyethylene through unique processing technology.

• Super hydrophobicity: hydrophobic filter forms a solid barrier to aerosols, eliminating the risk of cross-contamination between sample and pipette. • Optimal pore size: ensures smooth aspiration

• Advanced technology: ultra-fine grinding and moulding technique without mould release agent ensures better product quality.

• Innovative design: ensures good flexibility, sealability and compatibility.

• Standard workshop: Class 100,000 cleanroom to ensure the products are free of pyrogen and DNase/RNase.

• Transparency: good transparency make it easy to observe the liquid level during use.

• Resistant to organic solvents: used to pipette various organic solvents.

• Individual labelling: each package has a Cat. NO for quality tracking and traceability.

• Highly efficient sterilization- Larger effective membrane filtration area of 4.9 cm².

• High flow rate and throughput.

303206 Pipette Tips 吸頭 1000 μL, Clear Blue, No Filter, Non-Sterile

Wed, 20 May 2026 02:29:28 GMT

貨號

303206

1000 μL，透明藍，無濾芯，未滅菌

1000 μL, Clear Blue, No Filter, Non-Sterile